Applications:
•Pools, Hot Tubs
and Aquariums
•Basements
•Flooring and Decks
•Food and Water
Containment
•Roofing
•Commercial Showers
and Locker Rooms
•Fiberglass Reinforced Polymer Process (FRP)
•Tanks
•Underwater Crack
and Leak Repair
•Architecture
•Grain Bins
•Tunnels
•Waterproofing
and
Wall insulation
•Wet Wells
Protoseal™
Protoseal™ was designed to solve a problem...and that problem is...moisture! Moisture is the biggest problem coatings companies’ face today. Protoseal™ when applied to concrete and masonry products enters the pores, and expands to seal out moisture, allowing quicker coatings application. And, when applied over newly poured concrete much quicker cure times are the results.
Greater than 50 to 70 percent reductions of cure times have been observed. Unlike any other crystalline sealers on the market, Protoseal™ will not grow crystals and force coatings to delaminate
as the others do. Protoseal™ is not a latex based paint sealer, or a Portland based cement. Protoseal™ is an amorphous colloidal silicate hybrid, and forms a semi flexible substance that binds deep within the matrix of the cement. Protoseal™ never dries or hardens completely, never washes out, and is permanent.
Protoseal™ boasts the smallest particle size in the industry allowing much deeper penetration, just 4 to 5 nanometers, where standard sealers can only achieve 40 to 50 nanometers.
Because of this unique formulation, Protoseal™ can also be used to force contaminants from concrete that would otherwise be trapped, only to rise and cause delaminating. Protoseal™ has proven very effective.
Protoseal™ represents the most technologically advanced coatings preparation in the industry today. Protoseal™ is completely harmless and eco friendly. Protoseal™ has an endless shelf life.
For purchasing, click here to visit our products page.
