Get Plastered
Plaster and other mortar based coatings are a thing of the past, plaster / concrete is made with water and breaks down with water, not to mention plastering your pool is costly and leaves a rough texture causing blistering of the feet. Concrete and Plaster is porous leading the growth algae, and fungi. ArmorGuard Pool Coating System is not made with water and is exclusive to microban – a built in hard surface anti-microbial that will resist the growth of algae or fungi.

Don't Flake?
Pebble tech or other related coatings delaminate leaving a gritty feeling on your feet when the stones pop out, this process also promotes algae growth and costs $$$$. ArmorGuard Speckle Flake System when applied does not delaminate and fully encapsulates the flakes to prevent popping out.

Stay out of the Heat!
Most pool coatings delaminate and fail due high heat temperatures and excessive chemicals that are used in spas and hot tubs.  ArmorGuard is chemical and stain resistant and heat resistant to 245° F.

A Product You Can Trust.
ArmorGuard Pool Coatings are 100% solid, non toxic and odorless. ArmorGuard is chemical, stain resistant and is exclusive to microban ; a built in hard surface anti-microbial that will resist the growth of algae or fungi saving you approx 50% on chemical usage per year. ArmorGuard coatings insulate, keeping your pool 40% warmer and are smooth to prevent resistance meaning you can run your pool less saving you on energy costs. ArmorGuard® has excellent fill qualities, resulting in a perfect application – even on imperfect surfaces. Our product applies at approx 20 mils per coat; unlike other pool coatings that apply at 2-5 mils at best. ARMORGUARD IS THE WORLDS STRONGEST COATING...PERIOD!

A Permanent Solution
ArmorGuard Pool Coating System has been Field Tested and Proven to perform in all situations; freeze-thaw, aquariums, hot tubs, ponds and water containment tanks. Our Coatings work on all types of surfaces, fiberglass, wood, concrete, steel or tile. Call to speak to one of our trained pool specialists to discuss how we can solve your pool problems permanently.


ArmorGuard waterproofing system is applied in 3 simple steps with 3 advanced products.


Muriatic acid and TSP has become a product of the past when you use ArmorGuard concrete cleaner. Muriatic acid creates a salt that causes many failures of other coatings because the salts were not removed properly.
The ArmorGuard cleaner is a revolutionary cleanser, which removes oils, fats, waxes and etches the concrete with no VOC's.
ArmorGuard concrete cleaner converts bad calcium hydroxide (chalky calcium) to the good calcium silicate, which is extremely hard and will bond with the concrete permanently. This also acts as a penetrating sealer which will stop contamination from coming to the surface such as hydrostatic pressure, blistering and other problems. Ask any chemist or engineer and they will tell you this is a form of crystallization which helps prevent vapor transmission.
Cleaner Instructions Click here

Protoseal was designed to solve a problem...and that problem is...moisture! Moisture is the biggest problem coatings companies’ face today. Protoseal when applied to concrete and masonry products enters the pores, and expands to seal out moisture, allowing quicker coatings application. Also, when applied over newly poured concrete much quicker cure times are the results.
Greater than 50 to 70 percent reductions of cure times have been observed.
Unlike any other crystalline sealers on the market, Protoseal will not grow crystals and force coatings to delaminate as the others do. Protoseal is not a latex based paint sealer, or a Portland based cement. Protoseal is an amorphous colloidal silicate hybrid, and forms a semi flexible substance that binds deep within the matrix of the cement. Protoseal never dries or hardens completely, never washes out, and is permanent. Protoseal boasts the smallest particle size in the industry allowing much deeper penetration, just 4 to 5 nanometers, where standard sealers can only achieve 40 to 50 nanometers.
Because of this unique formulation, Protoseal can also
be used to force contaminants from concrete that would otherwise be trapped, only to rise and cause delaminating. Protoseal has proven very effective. Protoseal represents the most technologically advanced coatings preparation in the industry today. Protoseal is completely harmless and eco friendly. Protoseal has an endless shelf life.
Protoseal Instructions Click here

A one coat application of ArmorGuard Pool Coating.
ArmorGuard Top Coat Instructions Click here

Cracks, Leaks and Holes
Cracks, leaks and holes are not a problem. We developed
a Polymer Reinforced Trowel Mix that is 10 times stronger than concrete and will permanently seal those problem areas. We also have an Underwater Crack Repair Trowel Mix that will fully cure underwater; you don’t have to drain your pool.
Trowel Mix Instructions Click here

Common Questions – ANSWERED
1.Can I use this on a Concrete, Gunite, Marcite or fiberglass Pool
Yes, ArmorGuard can Coat over any existing surface leaving an almost maintenance free pool.

2. Can I use ArmorGuard on previous painted pools?
YES, if it was painted with an epoxy paint, if you have latex or water-based paint on pool you will need to sandblast, power wash, or scrap the old coating off.

3. Will ArmorGuard save me money?
YES, ArmorGuard is chemical, stain resistant and is exclusive to microban ; a built in hard surface anti-microbial that will resist the growth of algae or fungi saving you approx 50% on chemical usage per year. ArmorGuard coatings insulate, keeping your pool 40% warmer and are smooth to prevent resistance meaning you can run your pool less saving you on energy costs.

4. I have a Crack in my Pool do I need to drain it to repair the crack?
NO, with ArmorGuard Underwater Repair System, We can permanently repair any crack/hole without the need to drain.

5. What finishes can I choose from?
There are also many colors to choose from, or you can choose a speckle flake finish.

6.What if my water table is high? Do I have to drain my or pool to repair the leak?
No. ArmorGuard underwater leak system permanently fixes any cracks/damage without draining the pool or tank.

7.How long do I have to wait to fill my pool with water?
About 36 to 48 hours.