Applications:
•Pools, Hot Tubs
and Aquariums
•Basements
•Flooring and Decks
•Food and Water
Containment
•Roofing
•Commercial Showers
and Locker Rooms
•Fiberglass Reinforced Polymer Process (FRP)
•Tanks
•Underwater Crack
and Leak Repair
•Architecture
•Grain Bins
•Tunnels
•Waterproofing
and
Wall insulation
•Wet Wells
ArmorGuard®, the World’s Strongest Epoxy Coating is
easily roller applied. No special equipment is needed.
Our product applies at approx
20 mils per coat; unlike other
interior coatings that apply at
2-5
mils at best.
ArmorGuard is the
last coating you will ever need
PERIOD!
ArmorGuard® is a 100% solid
thermosetting epoxy made from
soybeans, beans and peanuts, with titanium and flex enhancers
added, for better durability and
flexibility.
What makes ArmorGuard Different?
Other coatings dry from the bottom up and contain harsh solvents
like MEK or Acetone, these solvents out-gas when drying, causing
air pockets and pin holes that absorb moisture, this is why other
coatings or paints FAIL overtime and delaminate, peel, and flake.
Coatings and paints that are not solid contain fillers like; sand or clay that contribute to chalking. Solvent based paints or coatings have a strong odor and are hazardous.
ArmorGuard® does not have harsh solvents in its mixture.
ArmorGuard® is 100% solid, odorless, non-toxic and safe.
ArmorGuard® dries from the top down eliminating the cause of
out-gassing and pin holes and will not FAIL overtime.
Until now, ArmorGuard® was only used for governmental, industrial
and commercial applications, but further research and development has proven that the potential for this product is limitless.
ArmorGuard® The World’s Strongest Epoxy Coating
is used for waterproofing, decks, biological containment, swimming pools, ponds, aquariums, roofs, floor, shower, sinks, tubs, decks, basements, food & water containment.
What this means to you...
ArmorGuard® will permanently solve your problem, and prevent any recurring problems
from arising. ArmorGuard® is the last coating you will ever need.
Did You Know?
75% of all coatings are not certified or even tested.
ArmorGuard® coatings are certified, independent laboratory
tested, and field proven to be the World’s Strongest.
Architects... GO GREEN!
Here at Eco Smart Epoxy Systems™ the
success of your next project is our business.
Are you an architect designing with green alternatives in mind?
Are you a builder or licensed contractor, looking for the absolute
best materials for your next project?
Microban is an additive that we mix with our epoxy coatings to help prevent the growth of microbes
(mold, mildew, algae, fungi, etc).
ArmorGuard® is exclusive to Microban.
